Clip range for standing seam metal roofs

Clip range

Metal roofs and facades are exposed to environmental influences such as wind, snow, hail
and temperature-related longitudinal expansions. To avoid any damage, it is essential to
correctly arrange the fixed and sliding clips.

Metal roofing long-sliding clip with 30 mm height

Sliding clips

Sliding clips belong to the indirect fastening means, which allow the expansion and contraction of the metal panels (metal sheets) without damage. By regulating the height over the clip base, a hig...

Fixed clip for standing seam metal roofs 30 mm heigh, 30 mm wide

Fixed clips

Fixed clips belong to the indirect fastening means, which allow a secure hold of the metal panels (metal sheets). The number of fixed points is determined by the inclination of the roof and the pos...

Metal roofing forked clips 78 mm heigh with expansion slot

Special clips

Sliding clips belong to the indirect fastening means, which allow the expansion and contraction of the metal panels (metal sheets) without damage.

Einödsbach winter

Installation & wind loads

The fixing by means of clips is considered as a mechanical, penetration-free fastening of the roof skin. The calculation principle is based on the plumbing rules, which are based on the DIN 1055-4 ...

  • Manufactured according to the regulations of the German plumbing trade of the ZVSHK *
    The laying arrangement of the sliding clips depends on the inclination of the roof and
    information about this can be found in the specialist rules of the plumbing trade. A
    professional as well as permanent securing is offered by the complete clip programme
    according to plumbing regulations.
    Worth knowing
  • All clips exclusively made out of building approved quality stainless steel 1.4301 (chromenickel-
    steel, non-magnetic)
  • A careful and accurate assembly of the individual clips is indispensable. Nails and screws
    etc. that are sticking out of the surface have to be worked over in order to avoid damages
    to the roof skin.
  • In the case additional snow retention clamps are installed, the fixed clips have to be able
    to hold the expected snow loads.
  • Depending on the length of the panels it has to be checked whether sliding clips should
    be used.
  • The regulation of the clip height via the clip base leads to higher stability.